Venture CNC Vision Systems
Fully Automated Multi Sensing

Venture online Demo

View Vision Brochure

Venture CNC models
take the power of fusion software one stage further
by completely automating the inspection process.

Now advanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators. CNC programming is a simple teach and repeat process.
Just measure the part once and a full CNC program is created automatically.
The zoom lens can also be controlled so that magnification changes are all recorded into the program.

STANDARD CNC SYSTEM FEATURES INCLUDE:

• Teach and Repeat programming
  
• Programmable segmented LED lighting
• High resolution 0.5µm scales for increased accuracy
  
• CAD import / export
  
• Scanning & best fitting
  
• Fully dimensioned part view
  
• SPC included
  
• One click output to Excel™
  
• Autofocus
  
• 165mm Z axis measuring range on adjustable dovetail slide
  
• 250mm x 120mm and 300mm x 300mm XY stages available
  
  LARGE MEASUREMENT VOLUME
  The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using Video Edge Detection for optimum speed and reduced inspection times.
  
  A probe changer rack can be installed so that probe modules fitted with a variety of pre-calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process.

When programming using the touch probe, use only the minimum points required to define each element. Then simply edit in the optimum number of points for each element. The new probe path is then automatically created when the program is played, cutting down both programming and inspection time.

Graphical reports show the measured part as a dimensioned drawing with ‘in tolerance’ dims shown in green and ‘out of tolerance’ dims shown in red for an instant pass / fail classification. Geometric call outs can also be shown as well as datum features and true position.

Supplementary tabulated reports show nominals as well as tolerance values with a ‘PASS’ or ‘FAIL’ SPC information can either be reported or exported to excel. Distribution and control
charts are also produced.

Contact us for more information or a Quote