Now with CNC!

Now you can enjoy all of the VµMaster measuring functionality with the added benefit of Automatic part inspection with full CNC control.

The VµMaster CNC cleverly retains the original manual handwheels so its just as easy to walk up and make manual measurements in an instant. But if you have a batch of components to inspect, the CNC takes over and drives the handwheels for you! Just load the part(s), click on play to run the program.
Thanks to our patented Colourmap technology you can make full use of the class leading 400mm x 300mm measuring envelope by palletising your parts and let VuMaster do the measuring giving you time to get things done.

Simply tell the software how many parts you’ve loaded, click on play and walk away!
When you return you’ll have a detailed dimensioned drawing for each part loaded showing in tolerance dimensions in green and out of tolerance dimensions in Red so that you can identify the problems at a glance.

SPC information is also available so you can look at trend data for any dimension on any part.The CNC control has been completely integrated with the manual control for the best of both worlds.

 When measuring manually, use the integrated handwheels to position the high resolution camera based measuring optics to the feature to be measured. Segmented LED lighting ensures that the exact edge you need can be seen by the camera. Now hit the auto-focus button and VuMaster will focus the image for you. Capture hundreds of data points along the edge of the feature to be measured using the advanced edge detection tools.
A fully dimensioned drawing of the measured part is then quickly produced for the fastest inspection possible.

Needs to do it again? No problem, VµMaster has automatically made a CNC program for you.
Just click on play and…. (you guessed it!)
Every light adjustment, focus change and different edge tool used first time around has been saved with each discreet measurement so you can measure part after part month after month safe in the knowledge that the measurement approach is identical – every time.

No operator influence. Consistent measurement conditions. Hundreds of data points per feature can only result in the fastest, most repeatable measurement system you’ve ever seen!

The future is here, Need to see more?

Click here for on-line demo

Contact Baty or your local dealer to arrange a demo

VµMaster is a CNC 2D
Vision system with a massive difference

VµMaster isCNC operated, inspection routines can be recorded and stored.

When played back, these ‘programs’ guide the operator through a pre-defined inspection procedure recreating the same lighting conditions and using ‘Video Edge Detection’ to automatically ’capture’ feature data.

Finally, a report is generated in the form of a fully dimensioned drawing of the measured part.